
Indirect-heating boiler
With a single coil
All the water is heated right to the bottom
The coil sits at the lowest level: no cold stagnant zones remain — and with them, no conditions for legionella to grow. The high-grade steel vessel operates under internal overpressure of up to 1.0 MPa.

100—5000L
Volume
14
Models
6bar
Vessel
10bar
Coil
Steel
Body
Design
All the water is heated right to the bottom
01
Protection
The low coil position heats the entire volume of the vessel.
02
Smooth surface
Minimal scale build-up and corrosion resistance.
03
Recirculation-ready
Port N5 — hot water reaches the tap without waiting.
04
High thermal insulation
42 kg/m³ HCFC-free polyurethane foam and an artificial-leather jacket.
Model range · Volume, litres
Technical parameters
Technical parameters
The full model range. The table scrolls horizontally.
| Model | VMEX 100 | VMEX 160 | VMEX 200 | VMEX 300 | VMEX 400 | VMEX 500 | VMEX 800 | VMEX 1000 | VMEX 1500 | VMEX 2000 | VMEX 2500 | VMEX 3000 | VMEX 4000 | VMEX 5000 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VolumeV (L) | 100 | 160 | 200 | 300 | 400 | 500 | 800 | 1000 | 1500 | 2000 | 2500 | 3000 | 4000 | 5000 |
| DiameterD (mm) | 490 | 590 | 590 | 590 | 750 | 750 | 950 | 1100 | 1300 | 1400 | 1460 | 1460 | 1710 | 1710 |
| HeightH (mm) | 1030 | 1060 | 1300 | 1810 | 1380 | 1620 | 1670 | 1900 | 1900 | 1900 | 2200 | 2600 | 2500 | 3000 |
| Water inlet / outletN1–N2 (in) | ¾″ | ¾″ | ¾″ | 1″ | 1″ | 1″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1½″ | 1½″ | 2″ | 2″ |
| Coil inlet / outletN3–N4 (in) | 1″ | 1″ | 1″ | 1″ | 1″ | 1″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ |
| RecirculationN5 (in) | ¾″ | ¾″ | ¾″ | 1″ | 1″ | 1″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1½″ | 1½″ | 2″ | 2″ |
| Magnesium anodeN6 (in) | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ |
| ThermometerN8 (in) | ½″ | ½″ | ½″ | ½″ | ½″ | ½″ | ½″ | ½″ | ½″ | ½″ | ½″ | ½″ | ½″ | ½″ |
| Inspection hatchN9 (in) | 4″ | 4″ | 4″ | 4″ | 4″ | 4″ | 5″ | 5″ | 5″ | 5″ | 5″ | 5″ | 5″ | 5″ |
| DrainN10 (in) | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ | 1¼″ |
| Dry weightW (kg) | 53 | 63 | 81 | 99 | 117 | 139 | 192 | 240 | 335 | 470 | 665 | 710 | 885 | 1005 |
We'll match the equipment to your project
Send us your boiler-room parameters — we'll suggest a model, size the output and prepare a commercial offer.


