
With a single coil
All the water is heated right to the bottom
- Volume: 100—5000 L
- Models: 14
- Vessel: 6 bar
VMEX membrane expansion tanks compensate for the thermal expansion of water or heat-transfer fluid, smooth out pressure fluctuations and damp water hammer in heating systems with a fluid temperature of up to 100 °C.

They compensate for the increase in fluid volume when heated.
They smooth out swings and extend the life of the fittings.
The membrane takes the shock, protecting the circuit.
To SNiP 2.04.07; glycol solution up to 50 %.
The full model range. The table scrolls horizontally.
| Model | Working pressure, bar | Connection diameter | Diameter, mm | Height, mm |
|---|---|---|---|---|
| 50 LT | 10—16 | 1″ | 380 | 750 |
| 60 LT | 10—16 | 1″ | 380 | 810 |
| 80 LT | 10—16 | 1″ | 425 | 960 |
| 100 LT | 10—16 | 1″ | 460 | 990 |
| 150 LT | 10—16 | 1″ | 508 | 1100 |
| 200 LT | 10—16 | 1¼″ | 585 | 1120 |
| 300 LT | 10—16 | 1¼″ | 635 | 1230 |
| 500 LT | 10—16 | 1¼″ | 750 | 1550 |
| 750 LT | 10—16 | 2″ | 800 | 1850 |
| 900 LT | 10—16 | 2″ | 800 | 1950 |
| 1000 LT | 10—16 | 2″ | 800 | 2180 |
| 1250 LT | 10—16 | 2″ | 958 | 2220 |
| 1500 LT | 10—16 | 2″ | 958 | 2380 |
| 2000 LT | 10—16 | 2″ | 1200 | 2520 |
| 2500 LT | 10—16 | 2½″ | 1200 | 2800 |
| 3000 LT | 10—16 | 3″ | 1200 | 2820 |
| 4000 LT | 10—16 | 3″ | 1500 | 2940 |
| 5000 LT | 10—16 | 3″ | 1500 | 3660 |
| 10000 LT | 10—16 | DN 100 | 1600 | 6100 |
The fluid is mains water per SNiP 2.04.07 or a water-glycol mixture (up to 50% glycol).
Send us your boiler-room parameters — we'll suggest a model, size the output and prepare a commercial offer.